This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong. {{tag>linux debian chrony ntp time date timedatectl timezone timezones}} =====Time Date Related Setup===== ====Setup NTP server==== The NTP server setup is quite simple, I used the reference from [[https://blogging.dragon.org.uk/using-chrony-on-ubuntu-18-04/|Using chrony on Ubuntu 18.04]]. I replace the pool servers with my local ones, ''sudo vim /etc/ntp.conf''. Some NTP tips: *To install: ''sudo apt install ntp ntpdate'' *To edit main configuration file: ''sudo nano /etc/ntp.conf'' *The [[http://support.ntp.org/bin/view/Servers/NTPPoolServers|NTP Pool Time Servers]] page provides the regional NTP servers/pools *The systemctl command (status, stop, start, restart): ''systemctl status ntp.service'' ====Setting System Time - Time Zone==== **Also checkout systemdtimed** Use the ''timedatectl'' command to interogate and modify time and date information as required, mainly used to set local timezone and daylight savings parameters. The following commands are typical: *''timedatectl'' and ''timedatectl status'' to list current system time date information. *''timedatectl list-timezones'' to list available time zones in timedatectl. *''sudo timedatectl set-timezone Australia/Perth'' to change timezone to desired. ---- <- home_server:home_server_setup:other_services:snapraid|Prev ^ home_server:home_server_setup:other_services:index|Start page ^ home_server:home_server_setup:other_services:aptcache|Next ->