Differences

This shows you the differences between two versions of the page.

--- linux_router:ubuntu [2023-06-18 Sun wk24 15:48] – [Disable snap in Ubuntu] baumkp
+++ linux_router:ubuntu [2024-09-21 Sat wk38 20:08] (current) – [Debian Router Setup] baumkp
@@ Line 1: / Line 1: @@
-{{tag>linux router setup debian ubuntu snap snaps}}
+{{tag>linux router "router configuration" setup debian ubuntu snap snaps}}
-======Router Basic Debian Server Setup======
+======Router Configuration & Server Setup======
-=====Debian=====
+=====Router Configuration=====
-Basically the same as Ubuntu, except I tried with Debian Buster (10).  I updated to Debian Bullseye (11) with no major problems. When I updated to Bookwork (12) the update failed.  I then managed to corrupt the configuration files on the router..... Hopefully these notes expedite recovery.
+<fc #ff0000>[DRAFT]</fc>
+A router performs the following key features:
+  - A gateway between different network areas
+    - Restrict network traffic
+    - Forward Network traffic
+    - Track network traffic, allows traffic incoming only if response to out going (one way traffic) This is primary firewall action and primary security action! This is often confused with NAT, NAT is additional to this!
+  - NAT (Network Address Translation) is basically mandatory for IPv4 due to limited address space and optional for IPv6
+    - NAT obfuscates Local IP addresses behind public addressable WAN IP address(es).  This obfuscation arguably provides some security. The key security is the restriction of gateway traffic into the LAN. See interesting notes on this from [[https://www.grc.com/nat/nat.htm|GRC NAT Router Security Solutions]], note that I do not necessarily agree with NAT being a primary security function.
+    - NAT obfuscation wrecks simple end to end IP addressing that is required for some services, e.g. VoIP.  This requires additional services to compensate, e.g. STUN/TURN services.
+Key networks services, such as DNS and DHCP are separate functions that a router may perform, although correct router setup is required to allow these services to function.
-Having used Ubuntu for the past many years I have grown use to netplan.  This is not native on Debian Buster, so needs to be installed: ''sudo apt install netplan.io''  it basically just seems to work.
+=====Debian Router Setup=====
+Basically the same as Ubuntu, except I tried with Debian Buster (10).  I updated to Debian Bullseye (11). When I updated to Bookwork (12) the update failed.  I then managed to corrupt the configuration files on the router..... Hopefully these notes expedite recovery.
+Having used Ubuntu for the past many years I have grown use to netplan.  This is not native on Debian Buster, so needs to be installed: ''sudo apt install netplan.io''  it basically just seems to work.  Now I have gone back to preferring /etc/network/interfaces.
 One of the benefits of Debian is no **Snaps**!   Also a whole pile of other Ubuntu crud is not there!
@@ Line 11: / Line 23: @@
 ----
-=====Ubuntu=====
+=====Ubuntu Router Setup=====
 ++++tl;dr;|
 Download the latest Ubuntu Server amd64 ISO file from the Ubuntu website. I setup the IPMI KVM to provide virtual storage to the Ubuntu ISO file and started up the Router. The Ubuntu software loads up of the ISO across the KVM virtual storage setup and can be then setup as normal. When setting up Ubuntu below are some the of keypoints:
@@ Line 17: / Line 29: @@
   *I do not encrypt the home directory. (See How to install [[http://www.havetheknowhow.com/Install-Ubuntu.html|Ubuntu Server]] - 20.04LTS for an explanation.)
   *I just use standard set-up for one main partition, which basically gives one large data partition using all the disk space, save that allowed for the SWAP partition. The SWAP partition is automatically sized based upon detected memory. (I have never been one for multiple partitions.)
-++++
+It seems now Ubuntu also requires you to login to get the latest updates...... No thank-you!
 ----