Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revisionPrevious revision
Next revision		Previous revision
linux_router:nftables [2024-06-16 Sun wk24 12:06] – [Router Configuration] baumkplinux_router:nftables [2024-09-21 Sat wk38 20:29] (current) – [iptables] baumkp
Line 1: Line 1:
 {{tag>linux router NFtables firewall}} {{tag>linux router NFtables firewall}}
 =====NFTables Configuration===== =====NFTables Configuration=====
-====Router Configuration==== 
-<fc #ff0000>[DRAFT]</fc> 
-A router performs the following key features: 
-  - A gateway between different network areas 
-    - Restrict network traffic 
-    - Forward Network traffic 
-    - Track network traffic, allows traffic incoming only if response to out going (one way traffic) This is primary firewall action and primary security action! This is often confused with NAT, NAT is additional to this! 
-  - NAT (Network Address Translation) is basically mandatory for IPv4 due to limited address space and optional for IPv6 
-    - NAT obfuscates Local IP addresses behind public addressable WAN IP address(es).  This obfuscation arguably provides some security. The key security is the restriction of gateway traffic into the LAN. See interesting notes on this from [[https://www.grc.com/nat/nat.htm|GRC NAT Router Security Solutions]], note that I do not necessarily agree with NAT being a primary security function. 
-    - NAT obfuscation wrecks simple end to end IP addressing that is required for some services, e.g. VoIP.  This requires additional services to compensate, e.g. STUN/TURN services. 
-Key networks services, such as DNS and DHCP are separate functions that a router may perform, although correct router setup is required to allow these services to function. 
- 
 The best reference for nftables is at the dedicated wiki [[https://wiki.nftables.org/|wiki nftables]]. Some other references I found [[https://gist.github.com/wolfhechel/db7ed3be31feb104752e|nftables router]]. The reference at stosb is good, but not for a router [[https://stosb.com/blog/explaining-my-configs-nftables/|Explaining My Configs: nftables]]. The best reference for nftables is at the dedicated wiki [[https://wiki.nftables.org/|wiki nftables]]. Some other references I found [[https://gist.github.com/wolfhechel/db7ed3be31feb104752e|nftables router]]. The reference at stosb is good, but not for a router [[https://stosb.com/blog/explaining-my-configs-nftables/|Explaining My Configs: nftables]].
  
Line 21: Line 9:
   * ''sudo sysctl net.ipv4.ip_forward=1'' to set or =0 turn off   * ''sudo sysctl net.ipv4.ip_forward=1'' to set or =0 turn off
   * ''sudo sysctl net.ipv6.conf.all.forwarding=1'' similar for ipv6    * ''sudo sysctl net.ipv6.conf.all.forwarding=1'' similar for ipv6 
 +====iptables====
 +It is not a good idea to have both iptables and nftables rules setup at the same time.
 +  *To check existing iptables rules: ''sudo iptables -S'', the output should be as follows, indicating no restrictions:
 +<code text>-P INPUT ACCEPT
 +-P FORWARD ACCEPT
 +-P OUTPUT ACCEPT</code>
 +  *The iptables rules can be flushed with ''sudo iptables -F''.
 +
 ====Sample NFTables configuration==== ====Sample NFTables configuration====