Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revisionPrevious revision
Next revision		Previous revision
home_server:home_server_setup:summary [2025-08-17 Sun wk33 10:35] – [Debian Setup] baumkphome_server:home_server_setup:summary [2026-01-25 Sun wk04 13:14] (current) – [Supermicro Computers with BMC and IPMI] baumkp
Line 22: Line 22:
  
 =====Supermicro Computers with BMC and IPMI===== =====Supermicro Computers with BMC and IPMI=====
-I have 3 computers from Supermicro with BMC and IPMI. The Supermicro provided utility program IPMIView is good, but the iKVM console redirection facility is woefully unreliable and also seems to be poorly documented! For more details on this refer to [[home_server:home_server_setup:other_services:ipmi_console]].  The 3 computers I have are:+I have 2 computers from Supermicro with BMC and IPMI. The Supermicro provided utility program IPMIView is good, but the iKVM console redirection facility is woefully unreliable and also seems to be poorly documented! For more details on this refer to [[home_server:home_server_setup:other_services:ipmi_console]].  The 2 computers I have are:
   * Supermicro A1SAi-2750F that is based upon the Intel C2750 SoC Atom server processor (8 core), which has 32GB RAM and I now use as my back-up server   * Supermicro A1SAi-2750F that is based upon the Intel C2750 SoC Atom server processor (8 core), which has 32GB RAM and I now use as my back-up server
   * Supermicro A2SDi-8C-HLN4F that is based upon the Intel C3750  SoC Atom server processor (8 core), which has 32GB RAM and I now use as my primary server   * Supermicro A2SDi-8C-HLN4F that is based upon the Intel C3750  SoC Atom server processor (8 core), which has 32GB RAM and I now use as my primary server
-  * Supermicro X11SBA-LN4F/F that is based upon the Intel Pentium N3700 a low power processor (4 core), which has 8GB RAM and I use as my router, with NFtables firewall stateful router, Bind9 DNS and ISC-DHCP and with my VDSL modem placed into by-pass mode (modem only operation)+  * Retired as became non-functional. Supermicro X11SBA-LN4F/F that is based upon the Intel Pentium N3700 a low power processor (4 core), which has 8GB RAM and I use as my router, with NFtables firewall stateful router, Bind9 DNS and ISC-DHCP and with my VDSL modem placed into by-pass mode (modem only operation)
   * All these units are supplied with 4 Intel based NIC + 1 BMC NIC with the ASpeed 2400 BMC controller   * All these units are supplied with 4 Intel based NIC + 1 BMC NIC with the ASpeed 2400 BMC controller
  
-On occasion I have had problems with the operations of these machines.  The computer would just halt, however the BMC / IPMI still seemed to operate.  This has happened now 2 times that I can remember in the past 7 years with 3 such computer setups, so it is very infrequent.  I hope the frequency does not increase!.  The solution to fix was very simple.  A cold reset of the BMC!  This is most effectively achieved by turning off the computer power supply!  I had a similar problem with my first 5 port unmanaged 2.5GB/s switch, again I simply need to cold reset about once every 6 months or so.  My new current 8 port unmanaged 2.5GB/s switch seems more reliable. +On occasion I have had problems with the operations of these machines.  The computer would just halt, however the BMC / IPMI still seemed to operate.  This has happened now 2 times that I can remember in the past 7 years with 3 such computer setups, so it is very infrequent.  I hope the frequency does not increase!.  The solution to fix was very simple.  A cold reset of the BMC!  This is most effectively achieved by turning off the computer power supply! My newest 4x 10Gbe/s + 12x 2.5Gbe/s switch from Xikestor seems to be quite reliable, I do no seem to have needed to reset to date after 12 months from operation/purchase (2026 Jan).
  
 ======Debian Setup====== ======Debian Setup======
 [[https://idroot.us/debian-13-released/|debian-13-released]] [[https://idroot.us/debian-13-released/|debian-13-released]]
 =====Debian upgrade===== =====Debian upgrade=====
-[[https://www.debian.org/releases/trixie/release-notes/upgrading.en.html#upgrades-from-debian-oldrelease-oldreleasename|Upgrade from Debian 12]] +  *[[https://www.debian.org/releases/trixie/release-notes/upgrading.en.html#upgrades-from-debian-oldrelease-oldreleasename|Upgrade from Debian 12]] 
-[[https://linuxiac.com/how-to-upgrade-to-debian-13-trixie-from-12-bookworm/|How to Upgrade to Debian 13 (Trixie) from 12 (Bookworm)]]+  *[[https://linuxiac.com/how-to-upgrade-to-debian-13-trixie-from-12-bookworm/|How to Upgrade to Debian 13 (Trixie) from 12 (Bookworm)]]
  
  
 <- ^ home_server:home_server_setup:summary|Start page ^ home_server:home_server_setup:home_it_setup|next page -> <- ^ home_server:home_server_setup:summary|Start page ^ home_server:home_server_setup:home_it_setup|next page ->