Differences

This shows you the differences between two versions of the page.

--- docker_notes:vm-container [2025-12-15 Mon wk51 07:13] – [KVM versus Proxmox] baumkp
+++ docker_notes:vm-container [2025-12-23 Tue wk52 10:48] (current) – [KVM versus Proxmox] baumkp
@@ Line 10: / Line 10: @@
 I may try Proxmox in the future, there is currently no compelling reason for me to do so at this time.
-As my old router became too unreliable to use circa November 2024, I have replaced.  ++My old router tl;dr|My previous router basic failed to operated reliably circa October 2024 had an Intel N3700 CPU, maximum 8GB ram, procured in 2016, which in 2024 is becoming slow to use, but still functions well as a sub gb/s router.  I also run a VM with Docker containers for a backup Bind9 DNS and backup Kea DHCP on this machine.  As my current (WAN) internet speed is about 920Mb/s down and 90Mb/s up this router is still suitable for purpose. I suspect it will not be limiting until the available WAN speeds are above 1000Mbps. I replaced the router early 2025 with an Intel N305, this is much faster overall and can easily handle multi Gb/s internet traffic, as well as more complex resource intensive Docker instances.)++
+As my old router became too unreliable to use circa November 2024, I have replaced.  ++My old router tl;dr|My previous router basic failed to operated reliably circa October 2024 had an Intel N3700 CPU, maximum 8GB ram, procured in 2016, which in 2024 is becoming slow to use, but did function well as a sub gb/s router.  I also run a VM with Docker containers for a backup Bind9 DNS and backup Kea DHCP on this machine.  As my current (WAN) internet speed is about 920Mb/s down and 90Mb/s up this router is still suitable for purpose. I suspect it will not be limiting until the available WAN speeds are above 1000Mbps. I replaced the router early 2025 with an Intel N305, this is much faster overall and can easily handle multi Gb/s internet traffic, as well as more complex resource intensive Docker instances.)++
+My main home server is based upon an Intel Atom C3750 server, this is still currently adequately meeting my needs. I have upgraded with a 10Gb/s PCIe card.  My router as of 2025-01 is a i3-305 based machine, with modern 2x 2.5GB/s NICs and 2 x 10GB/s NICs, all RJ45 type with 10GB/S NICs able to operate reliably and low power at all main speeds down to 10MB/s.  I also still operate an older Intel Atom C2750 as a back-up server. This gets started by the main server once a week to run a Restic back-up with a Python script I wrote.
+My main switch is a XikeStor SKS8300-12E2T2X.  This has 12x 2.5Gb/s RJ45 NICs, 2x 10Gb/s RJ45 NICs and 2x 10GB/s SFP NICS.  This allows me to connect my main switch and servers via 10GB/s networking. With the bulk of the other NICS rated up to 2.5Gb/s.  My main Atom C3750 server also has 4x 1Gb/s NICs.  I have 2 wireless access points Netgear WAX206 with upstream ethernet connections to the main switch operating at 2.5Gb/s and each with 4x 1Gb/s downstream ethernet connections available.  The Netgear WAX206 wireless access points are Wifi 6 rated which is sufficient for my current needs. I run OpenWRT firmware on these wireless access points as Netgear stopped supporting this hardware after only 3-4 years.  Suitable Wifi7 routers are still too expensive as of the writing (2025-12) to merit replacing the current access points.  At the moment these Wifi 6 access points connected via 2.5Gbe ethernet provide adequate performance, such that the cost to upgrade to Wifi 7 is not merited. One of the Wifi Access I use (in my study) requires additional Ethernet connections for printer and IPMI connectivity.  If I upgraded to a Wifi 7 access point at a minimum I would require a 10Gbe upstream connection with a 2.5Gbe and 2 x 1GBE downstream connection, preferable 10GBe upstream, 1x 10GBE and 2x2.5Gbe downstream, e.g TP-Link Archer BE800 or BE550Pro.
-My main home server is based upon an Intel Atom C3750 server, this is still currently adequately meeting my needs. I have upgraded with a 2.5Gb/s PCIe card.  My router as of 2025-01 is a i3-305 based machine, with modern 2x 2.5GB/s NICs and 2 x 10GB/s NICs, all RJ45 type with 10GB/S NICs able to operate reliably and low power at all main speeds down to 10MB/s.  I also still operate an older Intel Atom C2750 as a back-up server. This gets started by the main server once a week to run a Restic back-up with a Python script I wrote.