Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revisionPrevious revision
Next revision		Previous revision
docker_notes:docker-dhcp [2024-12-15 Sun wk50 12:21] – [References] baumkpdocker_notes:docker-dhcp [2025-06-08 Sun wk23 19:34] (current) – [main dhcp4] baumkp
Line 79: Line 79:
 I had a problem when upgrading to to Kea 2.6.0 that stopped kea-dhcp4 operating with an error ''file: /etc/kea/kea-dhcp4.conf, reason: subnet configuration failed: missing parameter ‘id’''.  The error also reported the configuration line where the missing parameter was expected.  Adding the missing parameter to the file as per Kea docs [[https://kea.readthedocs.io/en/kea-2.6.0/arm/dhcp4-srv.html#ipv4-subnet-identifier|ipv4-subnet-identifier]] resolved this error.  Apparently this parameter was auto assigned in earlier versions of Kea, if not manually assigned in configuration file.  In Kea version 2.6.0 manual assignment became mandatory, see [[https://kb.isc.org/docs/changes-to-be-aware-of-when-migrating-to-kea-2-6-0|Changes to Be Aware of When Migrating to Kea 2.6.0]].++++ I had a problem when upgrading to to Kea 2.6.0 that stopped kea-dhcp4 operating with an error ''file: /etc/kea/kea-dhcp4.conf, reason: subnet configuration failed: missing parameter ‘id’''.  The error also reported the configuration line where the missing parameter was expected.  Adding the missing parameter to the file as per Kea docs [[https://kea.readthedocs.io/en/kea-2.6.0/arm/dhcp4-srv.html#ipv4-subnet-identifier|ipv4-subnet-identifier]] resolved this error.  Apparently this parameter was auto assigned in earlier versions of Kea, if not manually assigned in configuration file.  In Kea version 2.6.0 manual assignment became mandatory, see [[https://kb.isc.org/docs/changes-to-be-aware-of-when-migrating-to-kea-2-6-0|Changes to Be Aware of When Migrating to Kea 2.6.0]].++++
  
 +++++Upgrade problems from Kea 2.6.2 to 2.6.3, yet again broken or perhaps enforced configuration backwards compatibility, TL;DR;|
 +The socket files **must** now be in ''/run/kea'' and directory permission must be set to 750.
 +
 +I previously used a general docker volume director directive to place all my configuration files into /app and then configured from there as required. 
 +    #"name": "/app/kea.leases4.csv",
 +    #Kea 2.6.3 requires /var/lib/kea
 +    "name": "/var/lib/kea/kea.leases4.csv",
 +
 +    "output": "/app/log/kea-dhcp4.log",
 +    "output": "/var/log/kea/kea-dhcp4.log",
 +
 +Symlinking did not seem to work:   /bin/ln -sf /app/log/ /var/log/kea , so I created a specific docker volume to the log file and this did work,  - '/mnt/docker_store/kea/.config/log:/var/log/kea'.
 +++++
 ====ctrl-agent -t /app/kea-ctrl-agent.conf==== ====ctrl-agent -t /app/kea-ctrl-agent.conf====
   *''kea-ctrl-agent -t /app/kea-ctrl-agent.conf'' to test the kea-cont-agent configuration file ''/app/kea-ctrl-agent.conf''     *''kea-ctrl-agent -t /app/kea-ctrl-agent.conf'' to test the kea-cont-agent configuration file ''/app/kea-ctrl-agent.conf''  
Line 109: Line 122:
     *[[https://web-wilke.de/install-and-run-kea-dhcp-with-stork-on-debian-11/|Install and run KEA DHCP with Stork on Debian 11]]     *[[https://web-wilke.de/install-and-run-kea-dhcp-with-stork-on-debian-11/|Install and run KEA DHCP with Stork on Debian 11]]
     *[[https://github.com/JonasAlfredsson/docker-kea| JonasAlfredsson / docker-kea ]]     *[[https://github.com/JonasAlfredsson/docker-kea| JonasAlfredsson / docker-kea ]]
 +    *[[https://www.henrydu.com/2020/09/15/kea-dhcp-webinar-01/|Kea dhcp webinar 01]]  [[https://www.youtube.com/watch?v=zr8kGTcJ5WY|Youtube Webinar]]
 Kea read the docs [[https://kea.readthedocs.io/en/latest/arm/intro.html|Intro]] give the latest docs and the into states which version this is.  A specific version can be found by changing the ''latest'' in the html path to the Kea version required, e.g. as of writing the current verion I am using is 2.6.1, so '%%https://kea.readthedocs.io/en/2.6.1/arm/intro.html%%'' [[https://kea.readthedocs.io/en/2.6.1/arm/intro.html|Intro]] Kea read the docs [[https://kea.readthedocs.io/en/latest/arm/intro.html|Intro]] give the latest docs and the into states which version this is.  A specific version can be found by changing the ''latest'' in the html path to the Kea version required, e.g. as of writing the current verion I am using is 2.6.1, so '%%https://kea.readthedocs.io/en/2.6.1/arm/intro.html%%'' [[https://kea.readthedocs.io/en/2.6.1/arm/intro.html|Intro]]
  
 <- docker_notes:docker-dns|Back ^ docker_notes:index|Start page ^ docker_notes:vpn|Next -> <- docker_notes:docker-dns|Back ^ docker_notes:index|Start page ^ docker_notes:vpn|Next ->