Search
You can find the results of your search below.
Fulltext results:
- Wireguard VPN access from WAN to LAN
- nd: * On the server side: ''sudo tcpdump -i wan_device -c 5 port vpn_port'', where wan_device is the wan device, in my case ppp1 and vpn_port is the port numb... ions</color> ++ | \\ +<color #202000/#F0F0E0> * Device definitions can be found using ''ip a'' \\ ... wan = ppp1</color><color blue> #definition of wan device label</color>\\ <tab3>define <color red>modem = eno1</color><color blue> #definition of modem device label</color>\\ <tab3>define <color red>lan =
- TC - Traffic Control
- shown in deeper filters! *''sudo tc qdisc show dev eno1'' shows current setting of interface ''dev eno1'' it would seem that Linux has default sett... andle ffff: ingress ExecStart=/sbin/tc filter add dev wan0 parent ffff: u32 match u32 0 0 action mirred egress redirect dev ifb-wan0 ExecStart=/sbin/tc qdisc replace dev ifb-wan0 root cake bandwidth 900mbit besteffort wash # Cleanup on stop ExecStop=/sbin/tc qdisc del dev wan0 root ExecStop=/sbin/tc qdisc del dev wan0 in
- NFTables Configuration
- ions</color> ++ | \\ +<color #202000/#F0F0E0> * Device definitions can be found using ''ip a'' \\ ... wan = eno1</color><color blue> #definition of wan device label, setup as ppp1 for pppoe</color>\\ <tab... m = eno1</color><color blue> #definition of modem device label</color>\\ <tab3>define <color red>lan = br0</color><color blue> #definition of lan device label</color>\\ <tab3>define <color red>lan_ip
- Router Miscellaneous
- ps://www.cyberciti.biz/faq/ubuntu-setup-a-bonding-device-and-enslave-two-real-Ethernet-devices/|setup a bonding device and enslave two real Ethernet devices]], [[https://www.cyberciti.biz/faq/how-to-create-bridge-inter
- ISP PPPoE Network Setup
- nf(8) man:interfaces(5) BindsTo=sys-subsystem-net-devices-eno1.device After=sys-subsystem-net-devices-eno1.device [Service] ExecStart=/usr/sbin/pppd call provider Type=forking Succe... p-pppoe.pid [Install] WantedBy=sys-subsystem-net-devices-eno1.device </code> Use ''sudo systemctl daemon-reload'' ... script: <code> ExecStartPre=/sbin/ip link set up dev eno1 ExecStartPre=/sbin/ip link add link eno1 nam
- DHCP / DNS Setup
- esses and only adds API pseudo devices # such as /dev/null, /dev/zero or /dev/random (as well as the pseudo TTY subsystem) to it, # but no physical devices such as /dev/sda. PrivateDevices=yes # Mounts the /usr, /boot... echo | openssl s_client -connect '9.9.9.9:853' 2>/dev/null | openssl x509 -pubkey -noout | openssl pkey
- Debian Server Network Setup
- m with this. In any case, you should always check dev names and not assume names, such as "eth0" To ch... cause delays as attempts are made to find network devices, particularly any not used. These delays are ... m with this. In any case, you should always check dev names and not assume names, such as "eth0" To ch... .\\ My routing table had ''2001:470:1f2c:10d::/64 dev he-ipv6 proto kernel metric 256 pref medium'', I
- Router Configuration, Switch & Server Setup
- not align with the existing address space. These device usually can not be directly plugged into an ex... o be configured. * ''ip a add 192.168.1.200/24 dev eth0'' to add an IP address to interface eth0 * ''ip a del 192.168.1.200/24 dev eth0'' to add an IP address to interface eth0 O... er then it is unlikely a connection to the remote device is available. * If accessing the equipment v
- Router VM
- al ports are connected to a common network bridge device. This seem to just work, and each physical device seems to operate at its specific capacity.) ... of multiple virtual Ethernet ports to the bridge device. This is a commonly used feature on VMs and co
- Wifi Router / Access Points
- 802.11k/v is band steering (i.e. help the client device to find a nearby AP that it would consider roaming to or "stimulate" a device to roam if an AP is saturated) =====/etc/conf... . =====homepage widget===== [[https://gethomepage.dev/widgets/services/openwrt/|Homepage openwrt widget
- ISP IPoE DHCP Setup Notes
- all Modifications==== When using pppoe a separate device is created that can be used to filter against. When using IPoE with dhcp same device reference is shared by the IPoE WAN link and t... wall needs to be modified to consider this shared device instead of separate one. Other than changing t
- Linux Router Background
- equipment and configurations. (Production versus development environment. I effectively had no development environment....) *Lastly, was my abilit
- Router Hardware
- tion is to turn off the Intel integrated graphics device (IGD), which is enabled by default. The graphi
- IPTables Configuration
- pported in this version. I tried the Ubuntu 18.04 development version and the previous noted bugs were