Search
You can find the results of your search below.
Matching pagenames:
Fulltext results:
- Conky @home_server:home_server_setup:other_services
- on ${color1}HARD DRIVE I/O ${hr 2}$color ${color0}Device:$color /dev/sdd3 ${color0}Reads: $color${diskio_read /dev/sdd3}/s${alignr}${color0}Writes: $color${diskio_write /dev/sdd3}/s ${color3}${diskiograph_read /dev/sdd3 30,225 33F... dd3 30,225 33FF00 FF3333 scale -t}$color ${color0}Device:$color /dev/nvme0n1p1 ${color0}Reads: $color${diskio_read /dev/nvme0n1p1}/s${alignr}${color0}Writes: $color${diskio_write /dev/nvme0n1p1}/s ${color3}${diskiograph_read /dev/nvme0
- KVM Setup
- xist, create: ''sudo mkdir /mnt/image''. *The device can then be mounted ''sudo mount /dev/nbd0p1 /mnt/image'' or ''sudo mount -r /dev/nbd0p1 /mnt/image'' to mount read only or ''sudo ... o umount /mnt/image'' *Delete the network block device with ''sudo qemu-nbd -d /dev/nbd0''. *If required the VM can be restarted wi... adx/linux-nbd-introduction-to-linux-network-block-devices-143365f1901b|linux NBD: Introduction to Linux Network Block Devices]] *[[http://alexeytorkhov.blogspot.com/2009... isk on vm *''sudo qemu-nbd %%--%%disconnect /dev/nbd0'' to disconnect the disk network block device *Qemu-discuss [[https://lists.nongnu.org/arc
- Linux Block Device Notes @home_server:home_server_setup:other_services
- ity/tutorials/how-to-partition-and-format-storage-devices-in-linux|How To Partition and Format Storage Devices in Linux]] ---- <- home_server:home_server_
- IPMI CLI Tools @home_server:home_server_setup:other_services
- IP -U $User_Name -f $PW_file_location power on &>/dev/null 2>/dev/null if [ $? -ne 0 ] then exit 12 ... -U $User_Name -f $PW_file_location power soft &>/dev/null 2>/dev/null if [ $? -ne 0 ] then exit 12 ... U $User_Name -f $PW_file_location power status 2>/dev/null) if [ ${?} -ne 0 ] then exit 11 #e... 8.1.41 -U baumkp -f /etc/ipmitool power status &>/dev/null) ; echo $? rc=$? if ["$?" -ne "0"] then ech
- Manjaro Setup Notes @home_server:home_server_setup:other_services
- #${color1}HARD DRIVE I/O ${hr 2}$color #${color0}Device:$color /dev/nvme0n1p5 #${color0}Reads: $color${diskio_read /dev/sdd}/s${alignr}${color0}Writes: $color${diskio_write /dev/nvme0n1p5}/s #${color8}${diskiograph_read /dev/sdd... sdd 25,150 33FF00 FF3333 scale -t}$color ${color0}Device:$color /dev/nvme0n1p5 ${color0}Reads: $color${diskio_read /dev/nvme0n1p5}/s${alignr}${color0}Writes: $color${diskio_write /dev/nvme0n1p5}/s ${color8}${diskiograph_read /dev/nvme0
- Rsync @home_server:home_server_setup:other_services
- ame as %%--devices --specials%%| | | ''%%--%%devices'' |preserve device files (super-user only)| | | ''%%--%%spec... ctHostKeyChecking=no \ -o UserKnownHostsFile=/dev/null \ -q user@host /usr/bin/hostname -s</cod... code>StrictHostKeyChecking no UserKnownHostsFile /dev/null LogLevel QUIET</code> For our backup utility... StrictHostKeyChecking no UserKnownHostsFile=/dev/null</code> In addition, add the following to the
- Back-up Server Old Setup @home_server:home_server_setup:other_services
- Size Used Avail Use% Mounted on udev devtmpfs 16G 0 16G 0% /dev tmpfs tmpfs 3.2G 2.7M 3.2G 1% /run /dev/sdd1 ext4 443G 161G 260G 39% / ... fs tmpfs 16G 0 16G 0% /dev/shm tmpfs tmpfs 5.0M 0 5.0... use.mergerfs 11T 177M 11T 1% /srv/storage /dev/sdb1 ext4 5.5T 89M 5.2T 1% /m
- NUT (Network UPS Tools) Setup @home_server:home_server_setup:other_services
- ey commands and scripts===== *List all the UPS device profile variable ''/bin/upsc KPBUPS@localhost 2>/dev/null''. *A script file to succinctly log the UP... t every 10 minutes ''sudo Myscripts/UPSScan.sh 2>/dev/null'',<code bash>#!/bin/bash # Logging output fo... =$logfile.$timestamp cp $logfile $newlogfile cat /dev/null > $logfile gzip -f -9 $newlogfile </code> ... ssue a SSL error to STDERR, so the addition of 2>/dev/null suppresses this. The parameters set in ups.
- Network Setup
- ps://www.cyberciti.biz/faq/ubuntu-setup-a-bonding-device-and-enslave-two-real-ethernet-devices/|setup a bonding device and enslave two real Ethernet devices]], [[https://www.cyberciti.biz/faq/how-to-create-bridge-inter
- snapraid @home_server:home_server_setup:other_services
- ified options, the "%s" string is replaced by the device name. # Refers at the smartmontools documentat... https://www.smartmontools.org/wiki/Supported_USB-Devices #smartctl d1 -d sat %s #smartctl d2 -d usbjmicron %s #smartctl parity -d areca,1/1 /dev/sg0 #smartctl 2-parity -d areca,2/1 /dev/sg0 </code> ++++ <- home_server:home_server_setup:other_serv
- Commonly used commands and scripts @home_server:home_server_setup:other_services
- | | php7.4-curl | | ✔ | ✔ | ✔ | | php7.4-dev | | ✔ | ✘ | ✘ | | php7.4-gd | | ✔ |... 0,55 * * * * /home/shared/Myscripts/UPSScan.sh 2>/dev/null #Runs Nut scan and logs formated results to ... ries) 4 Special files (usually found in /dev) 5 File formats and conventions, e.g. /e... '' or '' ip l'' for short, shows the network link devices *''ip route'' or ''ip r'' for short, shows
- IPMI Console Setup @home_server:home_server_setup:other_services
- TIMEOUT=8 GRUB_DISTRIBUTOR=`lsb_release -i -s 2> /dev/null || echo Debian` GRUB_CMDLINE_LINUX_DEFAULT="... large overheads) * The command ''sudo stty -F /dev/ttyS1'' can be used to check the parameters of th... erial connection. * The command ''sudo stty -F /dev/ttyS1 115200'' can be used to set the ttyS1 seria
- fsck - file system check
- tain intervals. To check this: ''sudo tune2fs -l /dev/sda1 | grep -i check''. *[[http://www.thegeekst... d configuration of a partition ''sudo tune2fs -l /dev/sdX'' ++++Home Server Index|<pagelist&header> *[... o display filesystem information is ‘’tune2fs -l /dev/sda2’’. The ‘’df’’ command lists current mounted
- SSH Notes @home_server:home_server_setup:other_services
- for partition in partitions: print(f"=== Device: {partition.device} ===") print(f" Mountpoint: {partitio
- VNC Server
- ion-is-required-to-create-a-color-profile-managed-device-on-ubuntu-22-04/|How to fix “Authentication is required to create a color profile/managed device”]] * sudo systemctl status tigervncserver@... is ''/home/homedirectory/Myscripts/StartVNC.sh >/dev/null 2>&1'' (I elected not to use the systemd se