Search

You can find the results of your search below.

Fulltext results:

TC - Traffic Control
21 Hits, Last modified:
shown in deeper filters! *''sudo tc qdisc show dev eno1'' shows current setting of interface ''dev eno1'' it would seem that Linux has default sett... andle ffff: ingress ExecStart=/sbin/tc filter add dev wan0 parent ffff: u32 match u32 0 0 action mirred egress redirect dev ifb-wan0 ExecStart=/sbin/tc qdisc replace dev ifb... s/man8/tc-cake.8.html|tc-cake]] *[[https://netdevconf.info/0x19/docs/netdev-0x19-paper16-talk-paper.pdf|mq-cake: Scaling soft
Wireguard VPN access from WAN to LAN
19 Hits, Last modified:
nd: * On the server side: ''sudo tcpdump -i wan_device -c 5 port vpn_port'', where wan_device is the wan device, in my case ppp1 and vpn_port is the port numb... ions</color> ++ | \\ +<color #202000/#F0F0E0> * Device definitions can be found using ''ip a'' \\ ... wan = ppp1</color><color blue> #definition of wan device label</color>\\ <tab3>define <color red>modem = eno1</color><color blue> #definition of modem device label</color>\\ <tab3>define <color red>lan =
DHCP / DNS Setup
11 Hits, Last modified:
esses and only adds API pseudo devices # such as /dev/null, /dev/zero or /dev/random (as well as the pseudo TTY subsystem) to it, # but no physical devices such as /dev/sda. PrivateDevices=yes # Mounts the /usr, /boot, and /etc directories read-only for processes invoke... echo | openssl s_client -connect '9.9.9.9:853' 2>/dev/null | openssl x509 -pubkey -noout | openssl pkey
NFTables Configuration
11 Hits, Last modified:
ions</color> ++ | \\ +<color #202000/#F0F0E0> * Device definitions can be found using ''ip a'' \\ ... wan = eno1</color><color blue> #definition of wan device label, setup as ppp1 for pppoe</color>\\ <tab... m = eno1</color><color blue> #definition of modem device label</color>\\ <tab3>define <color red>lan = br0</color><color blue> #definition of lan device label</color>\\ <tab3>define <color red>lan_ip
Router Miscellaneous
11 Hits, Last modified:
ps://www.cyberciti.biz/faq/ubuntu-setup-a-bonding-device-and-enslave-two-real-Ethernet-devices/|setup a bonding device and enslave two real Ethernet devices]], [[https://www.cyberciti.biz/faq/how-to-create-bridge-inter
Debian Server Network Setup
10 Hits, Last modified:
tps://github.com/systemd/systemd/blob/master/src/udev/udev-builtin-net_id.c#L20|Systemd Docs]]. I have no pr... tps://github.com/systemd/systemd/blob/master/src/udev/udev-builtin-net_id.c#L20|Systemd Docs]]. I have no pr... m with this. In any case, you should always check dev names and not assume names, such as "eth0" To ch... .\\ My routing table had ''2001:470:1f2c:10d::/64 dev he-ipv6 proto kernel metric 256 pref medium'', I
ISP PPPoE Network Setup
10 Hits, Last modified:
nf(8) man:interfaces(5) BindsTo=sys-subsystem-net-devices-eno1.device After=sys-subsystem-net-devices-eno1.device [Service] ExecStart=/usr/sbin/pppd call provider Type=forking Succe... p-pppoe.pid [Install] WantedBy=sys-subsystem-net-devices-eno1.device </code> Use ''sudo systemctl daemon-reload'' ... script: <code> ExecStartPre=/sbin/ip link set up dev eno1 ExecStartPre=/sbin/ip link add link eno1 nam
Router Configuration, Switch & Server Setup
4 Hits, Last modified:
not align with the existing address space. These device usually can not be directly plugged into an ex... o be configured. * ''ip a add 192.168.1.200/24 dev eth0'' to add an IP address to interface eth0 * ''ip a del 192.168.1.200/24 dev eth0'' to add an IP address to interface eth0 O... er then it is unlikely a connection to the remote device is available. * If accessing the equipment v
Router VM
4 Hits, Last modified:
al ports are connected to a common network bridge device. This seem to just work, and each physical device seems to operate at its specific capacity.) ... of multiple virtual Ethernet ports to the bridge device. This is a commonly used feature on VMs and co
Wifi Router / Access Points
3 Hits, Last modified:
802.11k/v is band steering (i.e. help the client device to find a nearby AP that it would consider roaming to or "stimulate" a device to roam if an AP is saturated) =====/etc/conf... . =====homepage widget===== [[https://gethomepage.dev/widgets/services/openwrt/|Homepage openwrt widget
ISP IPoE DHCP Setup Notes
3 Hits, Last modified:
all Modifications==== When using pppoe a separate device is created that can be used to filter against. When using IPoE with dhcp same device reference is shared by the IPoE WAN link and t... wall needs to be modified to consider this shared device instead of separate one. Other than changing t
Linux Router Background
2 Hits, Last modified:
equipment and configurations. (Production versus development environment. I effectively had no development environment....) *Lastly, was my abilit
Router Hardware
1 Hits, Last modified:
tion is to turn off the Intel integrated graphics device (IGD), which is enabled by default. The graphi
IPTables Configuration
1 Hits, Last modified:
pported in this version. I tried the Ubuntu 18.04 development version and the previous noted bugs were