Search

You can find the results of your search below.

Matching pagenames:

Fulltext results:

Conky
48 Hits, Last modified:
on ${color1}HARD DRIVE I/O ${hr 2}$color ${color0}Device:$color /dev/sdd3 ${color0}Reads: $color${diskio_read /dev/sdd3}/s${alignr}${color0}Writes: $color${diskio_write /dev/sdd3}/s ${color3}${diskiograph_read /dev/sdd3 30,225 33F... dd3 30,225 33FF00 FF3333 scale -t}$color ${color0}Device:$color /dev/nvme0n1p1 ${color0}Reads: $color${diskio_read /dev/nvme0n1p1}/s${alignr}${color0}Writes: $color${diskio_write /dev/nvme0n1p1}/s ${color3}${diskiograph_read /dev/nvme0
Linux Block Device Notes
19 Hits, Last modified:
ity/tutorials/how-to-partition-and-format-storage-devices-in-linux|How To Partition and Format Storage Devices in Linux]] ---- <- home_server:home_server_
IPMI CLI Tools
15 Hits, Last modified:
IP -U $User_Name -f $PW_file_location power on &>/dev/null 2>/dev/null if [ $? -ne 0 ] then exit 12 ... -U $User_Name -f $PW_file_location power soft &>/dev/null 2>/dev/null if [ $? -ne 0 ] then exit 12 ... U $User_Name -f $PW_file_location power status 2>/dev/null) if [ ${?} -ne 0 ] then exit 11 #e... 8.1.41 -U baumkp -f /etc/ipmitool power status &>/dev/null) ; echo $? rc=$? if ["$?" -ne "0"] then ech
Manjaro Setup Notes
14 Hits, Last modified:
#${color1}HARD DRIVE I/O ${hr 2}$color #${color0}Device:$color /dev/nvme0n1p5 #${color0}Reads: $color${diskio_read /dev/sdd}/s${alignr}${color0}Writes: $color${diskio_write /dev/nvme0n1p5}/s #${color8}${diskiograph_read /dev/sdd... sdd 25,150 33FF00 FF3333 scale -t}$color ${color0}Device:$color /dev/nvme0n1p5 ${color0}Reads: $color${diskio_read /dev/nvme0n1p5}/s${alignr}${color0}Writes: $color${diskio_write /dev/nvme0n1p5}/s ${color8}${diskiograph_read /dev/nvme0
Back-up Server Old Setup
12 Hits, Last modified:
Type Size Used Avail Use% Mounted on udev devtmpfs 16G 0 16G 0% /dev tmpfs tmpfs 3.2G 2.7M 3.2G 1% /run /dev/sdd1 ext4 443G 161G 260G 39% / ... fs tmpfs 16G 0 16G 0% /dev/shm tmpfs tmpfs 5.0M 0 5.0... use.mergerfs 11T 177M 11T 1% /srv/storage /dev/sdb1 ext4 5.5T 89M 5.2T 1% /m
Rsync
12 Hits, Last modified:
ame as %%--devices --specials%%| | | ''%%--%%devices'' |preserve device files (super-user only)| | | ''%%--%%spec... ctHostKeyChecking=no \ -o UserKnownHostsFile=/dev/null \ -q user@host /usr/bin/hostname -s</cod... code>StrictHostKeyChecking no UserKnownHostsFile /dev/null LogLevel QUIET</code> For our backup utility... StrictHostKeyChecking no UserKnownHostsFile=/dev/null</code> In addition, add the following to the
NUT (Network UPS Tools) Setup
11 Hits, Last modified:
ey commands and scripts===== *List all the UPS device profile variable ''/bin/upsc KPBUPS@localhost 2>/dev/null''. *A script file to succinctly log the UP... t every 10 minutes ''sudo Myscripts/UPSScan.sh 2>/dev/null'',<code bash>#!/bin/bash # Logging output fo... =$logfile.$timestamp cp $logfile $newlogfile cat /dev/null > $logfile gzip -f -9 $newlogfile </code> ... ssue a SSL error to STDERR, so the addition of 2>/dev/null suppresses this. The parameters set in ups.
snapraid
4 Hits, Last modified:
ified options, the "%s" string is replaced by the device name. # Refers at the smartmontools documentat... https://www.smartmontools.org/wiki/Supported_USB-Devices #smartctl d1 -d sat %s #smartctl d2 -d usbjmicron %s #smartctl parity -d areca,1/1 /dev/sg0 #smartctl 2-parity -d areca,2/1 /dev/sg0 </code> ++++ <- home_server:home_server_setup:other_serv
Commonly used commands and scripts
4 Hits, Last modified:
| | php7.4-curl | | ✔ | ✔ | ✔ | | php7.4-dev | | ✔ | ✘ | ✘ | | php7.4-gd | | ✔ |... 0,55 * * * * /home/shared/Myscripts/UPSScan.sh 2>/dev/null #Runs Nut scan and logs formated results to ... ries) 4 Special files (usually found in /dev) 5 File formats and conventions, e.g. /e... '' or '' ip l'' for short, shows the network link devices *''ip route'' or ''ip r'' for short, shows
IPMI Console Setup
3 Hits, Last modified:
TIMEOUT=8 GRUB_DISTRIBUTOR=`lsb_release -i -s 2> /dev/null || echo Debian` GRUB_CMDLINE_LINUX_DEFAULT="... large overheads) * The command ''sudo stty -F /dev/ttyS1'' can be used to check the parameters of th... erial connection. * The command ''sudo stty -F /dev/ttyS1 115200'' can be used to set the ttyS1 seria
SSH Notes
3 Hits, Last modified:
for partition in partitions: print(f"=== Device: {partition.device} ===") print(f" Mountpoint: {partitio
Simlinks
3 Hits, Last modified:
t allowed and hard links to files must be on same devices) Where: *To remove symlink ''%%rm "path/sym... the ''stat'' command on a file/directory/symlink/device/pipe to get the statistics of the file. Remem... k all these are stored as files. *''find dir -xdev \! -type d -links +1 -printf '%20D %20i %p\n' |
BASH Customisation
2 Hits, Last modified:
# recently modified alias mnt='mount | grep -E ^/dev | column -t' # show mounted drives alias dirsize=... sage='df -hlT --exclude-type=tmpfs --exclude-type=devtmpfs' # Shows the individual partition usages wit
logrotate
1 Hits, Last modified:
=$logfile.$timestamp cp $logfile $newlogfile cat /dev/null > $logfile gzip -f -9 $newlogfile </code> Re
Calibre Server
1 Hits, Last modified:
d.calibre-ebook.com/linux-installer.sh | sudo sh /dev/stdin''. As expected the installer came up with:
VIM Editor
1 Hits, Last modified: