Search
You can find the results of your search below.
Matching pagenames:
Fulltext results:
- Docker nginx / php notes @docker_notes
- when it comes to errors. We recommend using the ; development version only in development environments, as errors shown to ; applic... est practices and coding standards. That's what ; development servers and development settings are for. ; Note: The php.ini-dev... ets]] *[[https://www.sitepoint.com/docker-php-development-environment/|Setting Up a Modern PHP Development Environment with Docker]] *[[https://dev.to/texe/how-to-run-nginx-and-php-in-docker-5eoi|H
- Conky @home_server:home_server_setup:other_services
- on ${color1}HARD DRIVE I/O ${hr 2}$color ${color0}Device:$color /dev/sdd3 ${color0}Reads: $color${diskio_read /dev/sdd3}/s${alignr}${color0}Writes: $color${diskio_write /dev/sdd3}/s ${color3}${diskiograph_read /dev/sdd3 30,225 33F... dd3 30,225 33FF00 FF3333 scale -t}$color ${color0}Device:$color /dev/nvme0n1p1 ${color0}Reads: $color${diskio_read /dev/nvme0n1p1}/s${alignr}${color0}Writes: $color${diskio_write /dev/nvme0n1p1}/s ${color3}${diskiograph_read /dev/nvme0
- KVM Setup @home_server:home_server_setup
- xist, create: ''sudo mkdir /mnt/image''. *The device can then be mounted ''sudo mount /dev/nbd0p1 /mnt/image'' or ''sudo mount -r /dev/nbd0p1 /mnt/image'' to mount read only or ''sudo ... o umount /mnt/image'' *Delete the network block device with ''sudo qemu-nbd -d /dev/nbd0''. *If required the VM can be restarted wi... adx/linux-nbd-introduction-to-linux-network-block-devices-143365f1901b|linux NBD: Introduction to Linux Network Block Devices]] *[[http://alexeytorkhov.blogspot.com/2009... isk on vm *''sudo qemu-nbd %%--%%disconnect /dev/nbd0'' to disconnect the disk network block device *Qemu-discuss [[https://lists.nongnu.org/arc
- Docker Deluge Image / Service @docker_notes
- estions/1003011/openvpn-error-cannot-open-tun-tap-dev-dev-net-tun-no-such-file-or-directory|OpenVPN - ERROR: Cannot open TUN/TAP dev /dev/net/tun: No such file or directory (errno=2)]] ... .php?id=300928|openvpn ERROR: Cannot open TUN/TAP dev /dev/net/tun: Operation not permitted (errno=1)]] ... tps://dzone.com/articles/how-to-create-a-software-development-environment-o|DZone - How to Create a Development Environment on Alpine Linux]] *S6 *
- TC - Traffic Control @linux_router
- shown in deeper filters! *''sudo tc qdisc show dev eno1'' shows current setting of interface ''dev eno1'' it would seem that Linux has default sett... andle ffff: ingress ExecStart=/sbin/tc filter add dev wan0 parent ffff: u32 match u32 0 0 action mirred egress redirect dev ifb-wan0 ExecStart=/sbin/tc qdisc replace dev ifb... s/man8/tc-cake.8.html|tc-cake]] *[[https://netdevconf.info/0x19/docs/netdev-0x19-paper16-talk-paper.pdf|mq-cake: Scaling soft
- Linux Block Device Notes @home_server:home_server_setup:other_services
- ity/tutorials/how-to-partition-and-format-storage-devices-in-linux|How To Partition and Format Storage Devices in Linux]] ---- <- home_server:home_server_
- Wireguard VPN access from WAN to LAN @linux_router
- nd: * On the server side: ''sudo tcpdump -i wan_device -c 5 port vpn_port'', where wan_device is the wan device, in my case ppp1 and vpn_port is the port numb... ions</color> ++ | \\ +<color #202000/#F0F0E0> * Device definitions can be found using ''ip a'' \\ ... wan = ppp1</color><color blue> #definition of wan device label</color>\\ <tab3>define <color red>modem = eno1</color><color blue> #definition of modem device label</color>\\ <tab3>define <color red>lan =
- Homepage dashboard @docker_notes
- osted web page applications [[https://gethomepage.dev/latest/|homepage]] and [[https://heimdall.site/|H... Git page]] *homepage *[[https://gethomepage.dev/|homepage]] *[[https://gethomepage.dev/widgets/|widgets]] *[[https://gethomepage.dev/widgets/services/calibre-web/|calibre-web]]
- IPMI CLI Tools @home_server:home_server_setup:other_services
- IP -U $User_Name -f $PW_file_location power on &>/dev/null 2>/dev/null if [ $? -ne 0 ] then exit 12 ... -U $User_Name -f $PW_file_location power soft &>/dev/null 2>/dev/null if [ $? -ne 0 ] then exit 12 ... U $User_Name -f $PW_file_location power status 2>/dev/null) if [ ${?} -ne 0 ] then exit 11 #e... 8.1.41 -U baumkp -f /etc/ipmitool power status &>/dev/null) ; echo $? rc=$? if ["$?" -ne "0"] then ech
- Manjaro Setup Notes @home_server:home_server_setup:other_services
- #${color1}HARD DRIVE I/O ${hr 2}$color #${color0}Device:$color /dev/nvme0n1p5 #${color0}Reads: $color${diskio_read /dev/sdd}/s${alignr}${color0}Writes: $color${diskio_write /dev/nvme0n1p5}/s #${color8}${diskiograph_read /dev/sdd... sdd 25,150 33FF00 FF3333 scale -t}$color ${color0}Device:$color /dev/nvme0n1p5 ${color0}Reads: $color${diskio_read /dev/nvme0n1p5}/s${alignr}${color0}Writes: $color${diskio_write /dev/nvme0n1p5}/s ${color8}${diskiograph_read /dev/nvme0
- Back-up Server Old Setup @home_server:home_server_setup:other_services
- Type Size Used Avail Use% Mounted on udev devtmpfs 16G 0 16G 0% /dev tmpfs tmpfs 3.2G 2.7M 3.2G 1% /run /dev/sdd1 ext4 443G 161G 260G 39% / ... fs tmpfs 16G 0 16G 0% /dev/shm tmpfs tmpfs 5.0M 0 5.0... use.mergerfs 11T 177M 11T 1% /srv/storage /dev/sdb1 ext4 5.5T 89M 5.2T 1% /m
- Rsync @home_server:home_server_setup:other_services
- ame as %%--devices --specials%%| | | ''%%--%%devices'' |preserve device files (super-user only)| | | ''%%--%%spec... ctHostKeyChecking=no \ -o UserKnownHostsFile=/dev/null \ -q user@host /usr/bin/hostname -s</cod... code>StrictHostKeyChecking no UserKnownHostsFile /dev/null LogLevel QUIET</code> For our backup utility... StrictHostKeyChecking no UserKnownHostsFile=/dev/null</code> In addition, add the following to the
- NUT (Network UPS Tools) Setup @home_server:home_server_setup:other_services
- ey commands and scripts===== *List all the UPS device profile variable ''/bin/upsc KPBUPS@localhost 2>/dev/null''. *A script file to succinctly log the UP... t every 10 minutes ''sudo Myscripts/UPSScan.sh 2>/dev/null'',<code bash>#!/bin/bash # Logging output fo... =$logfile.$timestamp cp $logfile $newlogfile cat /dev/null > $logfile gzip -f -9 $newlogfile </code> ... ssue a SSL error to STDERR, so the addition of 2>/dev/null suppresses this. The parameters set in ups.
- DHCP / DNS Setup @linux_router
- esses and only adds API pseudo devices # such as /dev/null, /dev/zero or /dev/random (as well as the pseudo TTY subsystem) to it, # but no physical devices such as /dev/sda. PrivateDevices=yes # Mounts the /usr, /boot, and /etc directories read-only for processes invoke... echo | openssl s_client -connect '9.9.9.9:853' 2>/dev/null | openssl x509 -pubkey -noout | openssl pkey
- NFTables Configuration @linux_router
- ions</color> ++ | \\ +<color #202000/#F0F0E0> * Device definitions can be found using ''ip a'' \\ ... wan = eno1</color><color blue> #definition of wan device label, setup as ppp1 for pppoe</color>\\ <tab... m = eno1</color><color blue> #definition of modem device label</color>\\ <tab3>define <color red>lan = br0</color><color blue> #definition of lan device label</color>\\ <tab3>define <color red>lan_ip