Search
You can find the results of your search below.
Fulltext results:
- NFTables IP Control
- efine wan_ip4 = 112.213.222.38 # Clean out the current ruleset flush ruleset table inet firewall { ... set inet firewall controllist'' : will list the current elements in named set controllist *''sudo nft ... set inet firewall controllist'' : will flush the current named set controllist *''sudo vim /etc/nftables.conf'' : to edit the current NFTables configuration *''sudo systemctl resta
- Router Miscellaneous
- mputer Networks [[http://intronetworks.cs.luc.edu/current/html/index.html|Contents]], [[http://intronetworks.cs.luc.edu/current/html/ipv6.html|IP version 6], there is also a pdf
- Router Hardware
- mall ARM based machine, e.g. Raspberry Pi 3. (The current RPi looks much more capable.) However these machi... o update-grub' to make the modified grub file the current boot one. An on-line reference [[https://help.ubu
- TC - Traffic Control
- , tldr;| *''sudo sysctl -a | grep qdisc'' shows current default settings *''sudo sysctl -a | grep net.'... ilters! *''sudo tc qdisc show dev eno1'' shows current setting of interface ''dev eno1'' it would seem
- Wifi Router / Access Points
- oints (AP) than the all in one type routers. My current router is X86 based running Linux Nftables on bar... verage and helps share wifi radio bandwidth. The current access points are Netgate [[https://www.netgear.c
- NFTables Configuration
- \ <tab3> \\ <tab3><color blue> # Clean out the current ruleset</color>\\ <tab3> flush ruleset ++ | \\ +
- Debian Server Network Setup
- +++ Note: *Use ''ip a'' and ''ip r'' to analyse current network configuration *Use ''sudo journalctl -x
- Wireguard VPN access from WAN to LAN
- \ <tab3> \\ <tab3><color blue> # Clean out the current ruleset</color>\\ <tab3> flush ruleset ++ | \\ +
- DHCP / DNS Setup
- -sha256 -binary | openssl enc -base64'' to query current SPKI pin for Quad9 *This also seems to work f