Search

You can find the results of your search below.

Fulltext results:

VIM Editor @home_server:home_server_setup:other_services
27 Hits, Last modified:
p at 1 to bottom. * ''set relativenumber'' sets current line at 0 and numbers sequentially from 1 above and below * ''set number relativenumber'' sets current line at actual line number and numbers sequential... g off In visual mode '':set number!'' toggles the current number setting. Probably can not use this one in... all changes), and keep working | | :ZZ | write current file, if modified, and exit. | | :1,10 w outfil
Web Server setup
19 Hits, Last modified:
ed. *Use the command ''hostnamectl'' to check current Hostname *To change the Hosename: ''sudo host... functionality. ====Apache2 Setup==== *Copy the current html files to the proposed new location: ''sudo r... opments that require even larger keys or make the current system otherwise ineffective. The following is a... this there is no direct support for LetsEncrpyt's current version of installation software on Ubuntu 18.04,
KPTree Torrent VM Setup
16 Hits, Last modified:
disable, etc. Similarly to get a better look at current log status: ''journalctl -u openvpn@privatvpn.ser... * ''wget http://ipinfo.io/ip -qO -'' to check my current external ip address. * Unfortunately PrivatVPN ... to ensure operation. BTGuard seems to show there current IP addresses at their Knowledgebase [[https://btg... penvpn@privatvpn.service -b 0 -xe'' *__To check current external IP address: ''%%wget http://ipinfo.io/ip
KPTree - Home Desktop Setup
13 Hits, Last modified:
nce. Changes made to xref-dependent layers in the current drawing are valid in the current session only and are not saved with the drawing. ... gs.| |1 |Xref-dependent layer changes made in the current drawing take precedence. Layer settings are saved with the current drawing's layer table and persist from session to... to the xref layer properties are displayed in the current drawing (legacy behavior) **(default)**| |1 |When
KPTree - Email Server Setup
12 Hits, Last modified:
nt and effort to setup reliably and maintain. My current email server is based upon [[https://workaround.o... ng in later 2020 on Debian 10 (Buster). The most current is [[https://workaround.org/ispmail/bullseye/|ISP... ''sudo vim /etc/default/nfs-common''. However the current base options meet our needs and do not need to be... 00>**These setup notes are not compatible with my current email setup.**</fc>\\ ++++ My Email Server Histo
BASH Customisation @home_server:home_server_setup:other_services
6 Hits, Last modified:
+An example alias file:| <code bash> # This is my current / up-to-date list of bash aliases. # This is the ... u -ch | grep total' # Grabs the disk usage in the current directory alias diskusage='df -hl --total | grep ... most space. Both directories and files. Varies on current directory # BASH alias baupdate='. ~/.bashrc' al... h options, simply type ''shopt'' to see list with current settings. Looks like built ins only? * set [[h
Commonly used commands and scripts @home_server:home_server_setup:other_services
6 Hits, Last modified:
s) (enable / disable for boot control) *List current Systemd operating units: ''sudo systemctl list-un... lled php7.4 packages =====php packages===== ++++Current main used php extenstions:| |<38em 28% 36% 12% 12... the install php packages * ''php -v'' lists the current installed/operating php version In Alpine Linux ... command will be run when either field matches the current time. For example, "30 4 1,15 * 5" would cause a
NUT (Network UPS Tools) Setup @home_server:home_server_setup:other_services
6 Hits, Last modified:
UT (Network UPS Tools) Setup====== I purchased my current main UPS the Powershield Commander RT PSCRT1100 /... er.version.internal: 0.06 #Fix value input.current.nominal: 4.0 #nominal/design value inpu... #nominal/set value outlet.0.switchable: no output.current: 0.9 output.current.nominal: 4 #nominal/design value output.frequency: 50.0 output.frequency.no
fsck - file system check @home_server:home_server_setup
4 Hits, Last modified:
====Some other file system tips:==== *To check current mounted disks use ''df -h'' *To check current disks use ''sudo fdisk -l''. (This is a disk partition command. Be careful with use.) *To check current disks use ''sudo parted -l''. (This is a disk par... tune2fs -l /dev/sda2’’. The ‘’df’’ command lists current mounted disks. ---- <- home_server:home_server
Conky @home_server:home_server_setup:other_services
4 Hits, Last modified:
${color0}CPU Speed: ${tab 50}$color${freq 0} MHz Current / ${execi 99999 grep 'model name' /proc/cpuinfo |... -l} Cores ${color0}CPU Speed: $color${freq 0} MHz Current / ${execi 99999 grep 'model name' /proc/cpuinfo |... ${color0}CPU Speed: ${tab 50}$color${freq 0} MHz Current / ${execi 99999 grep 'model name' /proc/cpuinfo |... -l} Cores ${color0}CPU Speed: $color${freq 0} MHz Current / ${execi 99999 grep 'model name' /proc/cpuinfo |
IPMI CLI Tools @home_server:home_server_setup:other_services
3 Hits, Last modified:
itool -h'' * Chassis power commands: * List current power status: ''ipmitool -I lanplus -H 192.168.1.... 2.168.1.42 -U baumkp chassis policy'' * Lists current chassis policy state: ''ipmitool -I lanplus -H 19... 42 -U baumkp chassis policy list'' * List all current chassis info: ''ipmitool -I lanplus -H 192.168.1.
systemd Stuff @home_server:home_server_setup:other_services
2 Hits, Last modified:
flag and inputs: *''sudo journalctl -b'' to see current boot journal only use ''-b -1'' to see last boot ... =====systemd timers==== ''timedatectl'' to print current time date on cli\\ ''Date'' to print basic time
SSH Notes @home_server:home_server_setup:other_services
2 Hits, Last modified:
Min Frequency: {cpufreq.min:.2f}Mhz") print(f"Current Frequency: {cpufreq.current:.2f}Mhz") # CPU usage print("CPU Usage Pe
Linux Block Device Notes @home_server:home_server_setup:other_services
2 Hits, Last modified:
pecific drive When in parted: *''print'' to see current partition information *''mkpart help'' to list ... revision 4 SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) Local Time is: Sun Sep 14 11:21:22
Manjaro Setup Notes @home_server:home_server_setup:other_services
2 Hits, Last modified:
-l} Cores ${color0}CPU Speed: $color${freq 0} MHz Current / ${execi 99999 grep 'model name' /proc/cpuinfo |... ere is a problem with the RAM usage values in the current version of conky, it intermittently reads a negat
Network Setup @home_server:home_server_setup
1 Hits, Last modified:
Back-up Server Old Setup @home_server:home_server_setup:other_services
1 Hits, Last modified:
IPMI Console Setup @home_server:home_server_setup:other_services
1 Hits, Last modified:
VNC Server @home_server:home_server_setup
1 Hits, Last modified:
SWAP Files @home_server:home_server_setup:other_services
1 Hits, Last modified:
Time Date Related Setup @home_server:home_server_setup:other_services
1 Hits, Last modified:
NFS @home_server:home_server_setup:other_services
1 Hits, Last modified:
apt package management @home_server:home_server_setup:other_services
1 Hits, Last modified:
KVM Setup @home_server:home_server_setup
1 Hits, Last modified:
snapraid @home_server:home_server_setup:other_services
1 Hits, Last modified:
Simlinks @home_server:home_server_setup:other_services
1 Hits, Last modified:
samba @home_server:home_server_setup:other_services
1 Hits, Last modified: