Search

You can find the results of your search below.

Fulltext results:

Router Miscellaneous
15 Hits, Last modified:
53 {tcp, udp} Domain Name Server (DNS) bootps 67 {tcp, udp} Bootstrap Protocol Server (DHCP) bootpc 68 {tcp, udp} Bootstrap Protocol Client (DHCP) http 80 {tcp, udp, sctp} World Wide... cted since current boot *''journalctl --list-boots'' lists recorded boots. The default option for Storage is ''Storage=aut... irectory ''/var/log/journal'' is present previous boot log files are saved. Conversely if not present, then previous boot files are not saved. Check man journalctl.conf fo
Router Hardware
11 Hits, Last modified:
e by setting the "nomodeset" option into the grub bootloader. This can be done by editing the grub bootloader during boot up, a one off solution and by making permanent by... te.net/kb/a240/how-to-set-nomodeset-into-the-grub-bootloader-debian-and-ubuntu-intel-core-i7-3770.aspx|How to set 'nomodeset' into the grub bootloader]]. At the grub menu hit the arrow key to se... with 'linux'. Hit 'F10' to proceed with modified boot. For the permanent solution basically edit etc/de
NFTables Configuration
8 Hits, Last modified:
only use TCP!</color>\\ <tab6><color blue> # bootps, port 67 and bootpc, port 68 are for DHCP on both TCP and UDP, but ... color><color #000060/#F0F0FF> udp dport { domain, bootps, bootpc, 667, 953} counter accept</color> ++ | + <colo... ce index of the interface name causes an error on boot of the nftables.service, probably because the int... ld be to have a basic nftables.service script for boot, dropping all connectivity, except local ssh port
NFTables IP Control
8 Hits, Last modified:
r SSH on both TCP and UDP, but we only use TCP! # bootps, port 67 and bootpc, port 68 are for DHCP on both TCP and UDP, # b... ccept # iifname $lan udp dport { domain, bootps, bootpc, 667, 953} counter accept # al... f all the nftables journal entries since the last boot I made a couple of bash scripts to assist with ... ' : to list all the related cron jobs since last boot ''crontab'' is finicky! crontab does not necessar
Wireguard VPN access from WAN to LAN
6 Hits, Last modified:
only use TCP!</color>\\ <tab6><color blue> # bootps, port 67 and bootpc, port 68 are for DHCP on both TCP and UDP, but ... color><color #000060/#F0F0FF> udp dport { domain, bootps, bootpc, 667, 953} counter accept</color> ++ | + <colo... ick fix caused an error so I simply removed and rebooted. ''PostUp = ip -4 address add 192.168.6.1/24 de
Debian Server Network Setup
2 Hits, Last modified:
nning to allow correct VM startup. During initial boot this will cause delays as attempts are made to fi... or these NICs to come up, potentially saving some boot time. The WAN NIC is required, so the optional sa
IPTables Configuration
2 Hits, Last modified:
setup requirements==== ===Persistent IPTables on Boot and before Network Start-up:=== To initialise IPtables on boot, before the networks is brought on line: *Edit
TC - Traffic Control
2 Hits, Last modified:
easured download speed. ++++ ====Persist Across Reboots==== These tc commands do not survive a reboot on their own. Create a systemd service: ++++sudo vim /et
ISP PPPoE Network Setup
1 Hits, Last modified:
ournalctl -u pppoe -b 0 -xe''; ''-b 0'' sees last boot, ''-xe'' sees end of file, ''-f'' to list the end
DHCP / DNS Setup
1 Hits, Last modified:
/dev/sda. PrivateDevices=yes # Mounts the /usr, /boot, and /etc directories read-only for processes inv
ISP IPoE DHCP Setup Notes
1 Hits, Last modified:
s to the modem web interface</code> ++++ After reboot following ''ip a'' ++++ these entries were reveal
Wifi Router / Access Points
1 Hits, Last modified:
the certificates are updated the router must be rebooted or the uhttpd module restarted: *ssh into the